LAB FEES INCLUDED. Do-it-yourself kit will include: (1) Short Term
Radon in air (48-96 hour exposure period) Liquid Scintillation radon test vial, pre-addressed Priority Mailer (1 per order) & easy to follow
instructions. Extremely accurate & easy to use! Quick & reliable lab results are included in price. EPA recommends using 2 canisters per 1200 square foot
dwelling. Lab results are available online within 24-36 hours of receiving them back
in our lab.click here for results.
OUR LABS ARE EPA CERTIFIED
Click here for NJ testing
Download Instruction Sheet / Information Form
For short-term radon measurements with exposure times between 48 hours and 96 hours, we utilize the liquid scintillation (LS) type of patented pharmaceutical-grade charcoal-silica adsorption material. Near 100% counting efficiencies allow for a monitor that is lighter in weight (0.4 ounce) and easier to handle than traditional charcoal canisters. High efficiency counting also means that fewer samples are lost due to excessive decay time.
Each detector is given a unique bar-coded identification number. A measurement with the LS device in initiated by removing the cap to allow radon-laden air to diffuse into the charcoal packet where the radon is adsorbed. A polyethylene foam plug ensures passive diffusion, preventing distortions caused by drafts and air currents. At the end of the exposure (two days), the device is resealed securely and returned to our lab for analysis.
In the laboratory, the exposed detectors are prepared for analysis by radon desorption techniques. A major fraction of the radon adsorbed on the carbon is transferred into a vial of liquid scintillation fluid. The vials of counting fluid are then loaded into an automated liquid scintillation counter. The total beta activity is then counted for a pre-set time or until the standard deviation of the counts is at 2.5%.
The total beta count, along with the customer supplied exposure data, is used to calculate the radon concentration. The typical uncertainty (standard deviation) of an LS result is ±10% and the minimum reported concentration is 0.5 pCi/l.
Learn more about
Radon (New window will open and take you to our Radon Information site)
Click here for NJ testing
