Enter Your Radon Test Kit Serial Number:

• Short term & Water results are available the next business day after we receive them, except for Holidays.
  • units received Friday will have results available Monday afternoon
• Long term results take an average of 3 weeks for processing
• We will email your results to you as well as make them available here.
• Need to contact us regarding your results? eMail us

National Safety Products, Accustar Labs or any of its subsidiaries are not responsible for the consequences of any action taken or not taken based upon the results reported or any verbal or written interpretation of the results. Results provided by Accustar Labs.

Radon Results Lookup

Radon-resistant techniques (features) may vary for different foundations and site requirements. If you're having a house built, you can learn about EPA's Model Standards (and architectural drawings) and explain the techniques to your builder. If your new house was built (or will be built) to be radon-resistant, it will include these basic elements:

Gas-Permeable Layer: This layer is placed beneath the slab or flooring system to allow the soil gas to move freely underneath the house. In many cases, the material used is a 4-inch layer of clean gravel. This gas-permeable layer is used only in homes with basement and slab-on-grade foundations; it is not used in homes with crawlspace foundations. Plastic Sheeting: Plastic sheeting is placed on top of the gas-permeable layer and under the slab to help prevent the soil gas from entering the home. In crawl spaces, the sheeting (with seams sealed) is placed directly over the crawlspace floor. Sealing and Caulking: All below-grade openings in the foundation and walls are sealed to reduce soil gas entry into the home. Vent Pipe: A 3" or 4" PVC pipe (or other gas-tight pipe) runs from the gas-permeable layer through the house to the roof, to safely vent radon and other soil gases to the outside. Junction Boxes: An electrical junction box is included in the attic to make the wiring and installation of a vent fan easier. For example, you decide to activate the passive system because your test result showed an elevated radon level (4 pCi/L or more). A separate junction box is placed in the living space to power the vent fan alarm. An alarm is installed along with the vent fan to indicate when the vent fan is not operating properly.