- The Perfect Service & Maintenance Test Kit to Test Smoke and CO
Detectors
- UL/ULC Listed, Registered #372844,
#3728441, #3728383
- The easiest way to Meet NFPA 72 and International
Fire Code Compliance
- Versa-Test™ Dispenser Accepts Multiple Can Sizes
- Versa-Poles™ are Durable, Lightweight, Non-Conductive
Fiberglass
Supplied with:
- (1) VT-1 Aerosol Dispenser
- (1) VP-16 16' Telescoping Test Pole
- (1) VP-4X 4' Extension pole
- (1) VP-8 8' Telescoping Test Pole
- VT-694 Heat detector tester kit
- HC-94 Heat Detector Cup
- HA-94 Heat Detector Adapter
- VP- Adapter
- (6) Heat Pads
- (2) Saline Pillows
- Saline Syringe
- VT-OD Open Delivery Kit
- (1) N-30 30" Aluminum Test Head
- (1) N-59 50" Aluminum Extension Pole
- (1) 1490 18" Aerosol extension tube
- Adapter Professional Equipment Bag
Instructions for Use
- Remove bottom cup by screwing it counter clockwise
- Snap fit aerosol can into the cusp with the nozzle up
- Screw aerosol cup with can in place clockwise into base unit, until
aerosol is slightly released
- Unscrew the cup counter clockwise approximately half a turn to eliminate
the pressure on nozzle
- Insert yoke end of dispenser into end of Versa-Pole. For additional
reach add the VP-4X Adapter to top of VP-16 and insert dispenser into the
adapter
- Placing the open end of chamber over the detector, ensure a tight seal
to the ceiling Press upwards on the pole to engage. Only slight upwards
pressure is required to release the appropriate amount of gas to activate
the alarm’s sensor.
- Remove chamber from alarm to clear the sensing chamber.
| 
