Mercury in Water Test Strips 0 to 0.08 ppm (480049) 50 Test Strips

Model #: 480049

Reg. Price: ~~$19.99~~

$17.00

http://testproducts.com/mercury-water-test-strips-480049-test-strips-p-757.html

Add Qty to Cart:

	Product 7 of 23
Category Water Testing & Meters

Boris' Mercury Check™ (Hg - Free Dissolved)

Special Order Item. Full cases of 12 only.
Allow 14 to 21 days for delivery.

Alternative to wet chemical copper tests for several reasons
- No hazardous chemicals to mix
- MSDS is not required
- Quick results are obtained in less than 1 minute
- No identified interferences
The test is very convenient to run: dip test strip into sample for 30 seconds with constant back and forth motion, remove, and match color after 2 minutes to quantify the Mercury level in the sample.
Sensitivity: 0.0, 0.002, 0.005, 0.01, 0.02, 0.04 & 0.08 ppm (mg/L)
Total test time: 45 seconds
50 tests per bottle

Mercury is released to surface waters from rocks and soils and from industrial activities and wastewater treatment facilities. An indirect but significant source is the deposition of mercury emissions from power plants in rain to water surfaces and to soils. When mercury enters water, biological processes transform it to methylmercury, which is highly toxic and builds up in fish and animals that eat fish. For this reason, EPA sets a maximum contaminant level for mercury in drinking water and works with the states to issue consumption advisories. These advisories may be directed at the general population or at sensitive groups such as pregnant women, nursing mothers, and their children.