Kane May 940 Combustion Analyzer (KM940) with Draft Sensor, Probe & Case

Model #: KM940

$1,795.00

http://testproducts.com/kane-combustion-analyzer-km940-with-draft-sensor-probe-case-p-1184.html

Add Qty to Cart:

Quantity Discounts
1	2-5	6-11	12-23	24+
$1,795.00	$1,741.15	$1,687.30	$1,633.45	$1,579.60

	Product 11 of 20
Category Combustion Analyzers

The KM940 handheld analyzer is easy to use for domestic and industrial boiler flue gas measurement and analysis. It operates on all boiler types and can display 8 parameters simultaneously showing measurements and calculations of boiler efficiency and pollution. It measures O₂, flue and net T temperature and calculates CO₂, boiler efficiency, excess air and losses. CO is measured with a hydrogen compensated sensor for increased accuracy. It also measures CO and calculates CO/CO₂ ratio (The Poison Index) to give complete readings for effective boiler analysis and safety.

Features:

Measures CO, O₂, Inlet & Flue Temperature, Differential Pressure (draft)
Calculates Efficiency, Carbon Dioxide (CO₂), Losses, Excess Air, CO/CO₂, Poison Index, Net Temperature Differential
High suction double-headed diaphragm pump (can be used in flues with suction over 100 mbar without compromising accuracy)
Installed memory can store up to 150 readings and can transfer data to a printer or PC (via Infra-red printer link)
The printout displays the time and date of each measurement as well as personalized information such as company name and telephone number
Long life rechargeable battery & Large 4 line display
Optionally, it can also measure either NO₂ or SO₂ and can be fitted with CO and NO sensors with different measuring ranges
add up to 3 additional sensors

Specifications:

		Resolution	Accuracy	Range
Temp Measurement
Flue Temperature with Probe		0.1º	±2ºC ±0.3%	32-1112ºF (0-600ºC)
Inlet Temperature		0.1º	±1ºC ±0.3%	32-122ºF (0-50ºC)
Pressure		0.1 mbar	±2% of full scale	150mbar to -150mbar
Gas Measurement *
Oxygen O₂		0.1%	±0.2%	0 to 21%
Carbon Monoxide CO (H₂ compensated)		1ppm	±20ppm <400ppm+ ±5% <5,000ppm ±10% <5,000ppm	0 to 10,000ppm
Calculations
Carbon Dioxide CO₂ *		0.1%	±0.3%	0 to 99.9%
Losses +		0.1%	±1.0%	0 to 99.9%
Efficiency +		0.1%	±1.0%	0 to 99.9%
Excess Air +		0.1%	±0.2%	0 to 2885.0%
Temp (Nett) +		1.0º	±2ºC (±0.3%)	32-1112ºF (0-600ºC)
CO/CO₂ Ratio +		0.0001	±0.0001	0 to 0.9999
Poison Index +		0.01%	±0.01	0 to 99.99
	+ Using dry gases at STP * Calculated

Pre-programmed Fuels: Natural Gas, Town Gas, Gascor, Light Oil, Heavy Oil, Propane, Butane, Anthracite, Coke, Coal, Kinsale Gas
Dimensions:
- Handset: 8.7" x 2.2" x 4.7" (220 x 55 x 120mm)
- Probe Length: 420mm, 8mm Diameter with 285mm stainless steel shaft, type K thermocouple and 1.5m neoprene hose
Weight: 2.2 pounds
Altitude to 2000m
Ambient operating temperature range: 32º to 113ºF (0º to 45ºC)
Ambient operating humidity range:10 to 90% RH non condensing
Power supply (battery charger): Input: 110vAC / 220vAC; nominal Output: 12vAC off load
Battery Life: >6 hours from full charge
Probe & hose lined with Teflon to reduce absorption of sample gases

Supplied with:

Teflon lined Flue gas probe, Battery & Battery charger
Protective rubber boot, User's manual & Large Cordura carrying case
One year limited manufacturer's warranty (2 year on O₂ sensor)

Options: You can add up to 3 additional sensors

GAS		RANGE	PART#
CO (H₂ Compensated)		0~10,000ppm	12933
CO (Hi-Range)		0~10%	13911
NO₁		0~5,000ppm	13251*
NO₁ low range		0~100ppm	18079*
NO₂		0~1,000ppm	10533
SO₂		0~5,000ppm	13910
SO₂ low range		0~100ppm	18131
	*NOX will be calculated only if NO₁ sensor is installed.

Smoke Pump Test Kit: SPT1
Inlet Temperature Probe (6" Liquid K-Type): ATT100
Infrared Printer: KMIRP2

Download Data Sheet (PDF format)

Download Users Manual (PDF format)