Digital Moisture Meter 0-40% (50218) with Nylon Carrying Case

Features:

• Easy to Read Large LCD display
• Data Hold Button
• Low Battery Symbol
• Protective Pouch Included

Specifications:

• Measuring range: 5% to 40%
• Accuracy:  ±1% Reading
• Resolution: 1%
• Power: (1) 9V Battery (not included)
• Operating temperature range: 32° F to 104° F (0° C to 40° C)
• Operating humidity range: 0 to 70% RH
• Dimensions: 5" x 2 ½" x 1 ¼"
• Weight: 4 oz. with battery

Directions:

1. Remove back cover and install one 9V battery, pressing tabs firmly in place.
2. Remove cover by pressing UP upward with your thumb.
3. Press P to power on unit and the insert the pins into wood approximately 1/8” into wood, wallboard of material to be tested*. The moisture content will display on LCD.
4. To HOLD current reading, press H button. Press H again to cancel or to take next reading.
5. When finished, turn it off by pressing the P button and replace cover on probes.

* WARNING: DO NOT PLUG THE PROBES INTO ANY ELECTRICAL RECEPTACLES.

NOTE:

• The pins are very sharp, keep out of the reach of children!
• To avoid injury, do not point pins at people or animals.
• Keep unit dry and clean to ensure accuracy.
• If not in use for a long period of time, remove the battery.
• Abnormally high readings may be caused by surface salts on newly plastered walls or by contact with metal or steel reinforcing bars etc behind a particular surface.