Conductivity Meter: Digital 0-1999µS (PWA-301) with Integral Sensor Tip

The Pure Water Tester (Water Quality Tester) was designed to check the purity of water by way of the water's conductivity. It is used to measure the conductivity value (from 0 to 1,999 uS/cm) which can assist in evaluating whether water is pure or not. The conductivity value will be lower when a low level of impurities exist in the water (distilled water has a low conductivity value of approximately <10 uS/cm).

uS/cm = microsimens per centimeter

• All-in-one conductivity meter with integral electrode
• Microcomputer circuit, intelligent function, high accuracy
• Tests water quality for drinking, industrial use and water filter effectiveness
• IP-67 water resistant heavy duty housing
• External calibration buttons
• Highly reliable carbon rod electrode
• Built in temperature sensor with ATC (Automatic Temperature Compensation)
• Compact size, easy operation & light weight
• Data hold feature
• Auto power off (after 10 minutes of inactivity)
• Record Minimum & Maximum
• Ideal for water conditioning, aquariums, food processing, photography, schools, laboratories, industrial and quality control
• Check the condition of water filters

Specifications:

• Measurement range: 0 to 1999µS/cm
• Resolution: 1 µS/cm
• Accuracy: ±3% + 1d FS
• Sampling time: approximately 0.8 second
• Display: LCD, size 20x28mm
• Power: (4) AAA 1.5vDC batteries
• Probe: carbon rod electrode for long life
• Operating temperature: 32° to 140° (0° to 50°)
• Operating humidity: less than 80% RH
• Power Supply: (4) AAA 1.5v  batteries
• Power consumption: approx. 5.7 mA
• Dimensions:  7.5" x 1.6" x 1.6" (190x40x40mm)
• Weight: 0.38 LB (171g)

Download Users Manual (PDF format)