UEI Analog Multimeter (M75A) 17 Ranges

The M75A has the features you need for testing electrical and HVAC/R systems. Its voltage ranges are scaled to keep typical readings in the middle of the scale for increased accuracy and resolution. It also includes a low ohm scale to test critical connections as well as micro-amps and milli-volts functions to verify heat anticipator and flame safeguard circuits. The M75A has the following features:

• 17 ranges
• 1000 Volts AC and DC
• Resistance 50 kilohm
• DC micro/milli amps
• DC millivolt scale allows use of adapters
• Color-coded and mirrored scale plate
• Three year limited warranty

Specifications:

• Ranges:
  • DC Millivolts 0 - 250 mV
  • DC Volts 0 - 2.5, 10, 50, 250, 1000 V
  • DC Microamps 0 - 50 μA
  • DC Milliamps 0 - 25. 250 mA
  • OHMS 0 - 500!, 5K, 50K
  • AC Volts 0 - 10, 50, 250, 500, 1000 V
• Temperature: 0 - 250°F
• Accuracy:
  • DC ±3% of full scale
  • OHMS ±3% of scale length
  • AC ±4% of full scale
  • Temperature ±2 divisions
• Input impedance 20KΩ / C DC, 10KΩ / V AC
• Batteries Two 1.5V, size AA (NEDA #15D) batteries
• Fuse 1/4A (2.0 ohm internal resistance) 3AG series

Note: To maintain calibration accuracy and instrument protection, replacement fuse must be of the proper current and resistance value.

Standard Accessories:
Test leads (set) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ATL3
Test leads, rubber . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ATL25
Alligator clip adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .AAC
Fuse 1/4A, 2! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .AF2
Battery 1.5V, size AA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .AB1
Optional Accessories:
Temperature adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .TA2K

Download Users Manual (PDF format)