Alarm: Radon Gas Detector & Monitor (HS71512) EPA Approved Pro Series 3

Model #: HS71512

Reg. Price: ~~$159.95~~

$129.95

http://testproducts.com/alarm-radon-gas-detector-monitor-hs71512-epa-approved-pro-series-p-701.html

Add Qty to Cart:

Quantity Discounts
1	2-5	6-11	12-23	24+
$129.95	$124.75	$119.55	$114.36	$109.16

	Product 19 of 25
Category Radon Mitigation

Meets EPA Performance Criteria of the CR protocol. Our electronic radon gas detector/monitor is a proven performer being in service since 1996. Used by inspectors, consultants and homeowners to monitor the radon gas levels in schools, offices and residences. It is a solid state continuous radon monitor which utilizes patented technology. At the heart of the device is a measurement circuit and pulse processing software which records alpha events on a photovoltaic sensor. Radon daughters create a spark when they come in contact with the potential across the collection dome and the photovoltaic sensor counts these pulses. The software equates pulse volume into pCi/L (Pico Curies per Liter) and then displays the information on the LED display. Follow this link for more technical info (will open in new window)

Features:

No wiring or batteries needed; uses typical 110v household current.
Entela Certified
Results will display in approx 48 hrs on a numeric digital LED display
Shows the level of radon gas in pCi/L on a short-term or long-term basis
2 modes of measurement - long & short term
Alarm sounds:
- Long-term measurement reaches 4 pCi/L or greater (can be silenced)
- Short-term measurement stays above 4 pCi/L for 30 consecutive days
Samples air continuously; display updated every hour.
Self-test every 24 hours with an error code displayed if failure.
10' power cord supplied
Menu button controls 4 functions. Re-set unit and use in different locations.
UL61010B-1:2003 Issued: 1/24/03 Ed: 1 Standard for Safety Electrical Measuring & Testing Equipment; Part 1: General requirements
CSA C22.2 NO 1010.1-92 - Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory Use, Part 1: General requirements
10 year sensor and a 1 Year warranty!

Specifications:

Power source input: 120 VAC / 60Hz at 6.5 Watts
Power source output: 18 VDC / 200mA
Sensor: Ionization Chamber
Sensor voltage: 250VDC
Full scale reading: 0.1 to 999.9 pCi/L
Operating temperature: 32° to 104° F (0° to 40° C)
Storage temperature: -4° to 185° F (-20° to 85° C)
Audible Alarm: 85dB at 10cm
Beeps every hour if:
- long-term readings are 4 pCi/L or greater or
- short-term measurement stays above 4 pCi/L for 30 consecutive days
Averaging frequency: Levels will be updated on the display every hour
Short-Term: Average over the past 7 days
Long- Term: Average from the time of last reset (5 year max) resets after 5 years
Accuracy: ±12% pCi/L (click here to see accuracy report in PDF format)
Dimensions: 4.7" x 3.1" x 2.1"

Supplied with:

Pro III Radon Gas Detector
Owner's manual
Tips on locating detector
1 year limited manufacturer's warranty
10' power cord

	Product 19 of 25
Category Radon Mitigation

Customers who bought this product also purchased:

Manometer: Analog -4" to 4" WC (RA-50002-1) w/Gage Oil	DC Power Supply: Converts 110/120vAC to 18vDC 200mA (18VDC) for Pro Series Radon Monitors	Power Cord: 72", 18 gauge HEAVY DUTY (RA72) with 3 Prong Plug & Water Tight Bushing	Vent Cap: PVC Schedule 40, 4" (RA-76002) White
Fan Guard Kit (RA-76040-2) Condensation ByPass 4" Schedule 40	Installation Kit for RadonAway System: 4x4 BLACK (RA-28035) with Couplings, Manometer & Labels	Radon Away Mitigation Fan: 4" Inlet/Outlet Diameter 110vAC, 45-66 watts (XP201) 125 CFM	Accustar Long Term Radon Gas Test Kit (AT100) Alpha Track w/Analysis